Planetary Ball Mill Machine Operation Steps

Operation Steps
Operation Procedure: Checking (Accessory and Machine Testing) Matching Balls and Loading Material Pot Loading Switching On Setting Parameters Grinding Machine Stopping Unloading Pot and Discharging Powder Machine Cleaning.
1.4.1 Check
1.4.1.1 Accessory and Outlook Check
First, check the packing list carefully after opening the plywood case, and make sure if there is any missing on the attachment, whether there is any break or damage to the shell off the machine during transportation. If any, please do not hesitate to inform us immediately. If everything is normal, switch on power and let the machine work without any load (mill jars and mill balls).

1.4.1.2 Running Without Load

Figure 3 Diagram of Control Panel of Planetary Ball Mill
3-1 Frequency Speed Controller 3-2 Emergency Switch
3-3 Start Button 3-4 Stop Button
Steps of Testing Machine Without Load

1. Switch on power source and turn on the air switch;
2. Turn the rotate button (white color) on (3-1) at anti-clockwise to the maximum limit;
3. Start up the safety switch (3-2). ( safety switch is used for emergency,
4. It disconnects power if pressed, it is under running condition if rotating the button at clockwise counter). Check if the indicator is lighted or not,
5. Turn on the start button (3-3), check if speed indicated on frequency converter is zero, turn slowly the rotate button on (3-1) at clockwise counter and adjust the speed to 50% of the maximum rated rotating speed, and keep the machine run for 5 minutes.
6. If no unusual occurs, you may turn the rotate button to zero, press stop button (3-4), emergency switch (3-2) and disconnect the power supply to stop machine.